WELLCOM TRS - manufacturer

 
 

 
 

 

WELLCOM TRS - manufacturer

Ice machine tube for industrial and commercial application

Through the stainless or copper tube,As the production accomplished, 7/8",1-1/8',and 1-3/8" sized tube ice will be harvested by thawing gas. This cylinder ice is used for various allplication.commercial and industrial.Ice machine tube with stainless steel evaprator tube can be used for ediable purpose for commercial.Also cooper evaporator tube of this ice machine tube can be used for industrial heat cooling purpose.TRS as ice machine manufacturer, produce from 3 tons to 70 tons per unit for commercial and industrial.TRS also commit rental service and used machine for the customer who want to reduce initiall investment for new business. This service is also available for oversea's customer.TRS use open drive recip compressor or screw compressor for this ice machine tube. and PLC control optional  

TRS MODEL  WCCTIM-WOC / SC

 

 

 
             WOC-CTIM-WOC(Without Condensing Unit, CUBE TUBE  generator only)
TUBE  EVAPORATOR W/CUTTER ONLY
Model-Tons Compressor breaker - Cutter Motor Pump Motor/Water supply Dimensions
KW KW     KW/GPMm   L    W   H (mm)
WOCCTIM300-3 11 0.75 0.75 750   1200  1730
WOCCTIM1000-4.8 15 0.75 0.75 1300   1200   2150
WOCCTIM1100-5.0 15 0.75 0.75 1300   1200   2150
WOCCTIM1200-5.6 15 0.75 0.75 1300   1200   2150
WOCCTIM7500-7.0 22 3 3 1300   1200   3000
WOCCTIM10000-10 30 3 3 1500   1200   3000
WOCCTIM18000-18 60 3 3 1850   1900   2680
WOCCTIM35000-35 100 3 3 2450   1900   4420
WOCCTIM50000-50 125 3 5 2450   1900  4420
WOCCTIM70000-70 200 3 7.5 2450   1900  4420

WOC CTIM-Evaporatoronly

ICE SIZE 7/8",1-1/8",1-3/8"

WCTIM-SC(Self contained)
  WCCTIM-SC(SELF CONTAINED WITH CONDENSING UNIT) 
Model-Tons  Compressor breaker - Cutter Motor Pump Motor/Water supply Dimensions
HP HP  KW/GPM H     L    W (mm)
WCCTIM300-3 15 0.75 0.75 1250   1200 1730
WCCTIM1000-4.5 20 0.75 0.75 2600   1200   2150
WCCTIM1100-4.9 20 0.75 0.75 2600   1200   2150
WCCTIM1200-5.3 20 0.75 0.75 2600   1200   2150
WCCTIM7500-7.0 30 3 3 2600   1200   3000
WCCTIM1000-10 40 3 3 3000   1200   3000
WCCTIM18000-18 80 3 3 3650   2200   2680
WCCTIM3500-35 125 32 3 4870   2200   4420
WCCTIM50000-50 150 3 3 4870   2200  4420
WCCTIM75000-75 250 3 7.5 4870   2200  4420

 
  • The specification comparision TRS WCTIM100-4.9 with Vogt p118/The specification comparision TRS WCTIM1000-10 with Vogt P18-XT/DX11
  • The specification comparision TRS WCTIM18000-10 with Vogt P24/The specification comparision TRS WCTIM35000-35 with Vogt P34

 
standard conditions*
Capacity is rated under the following standard conditions 
Necessary Freezing capacity calculation 
for compressor selection of WOCFIM Model buyer 
   
Water temperature 60F (18C), incoming 1. One refrigeration ton (T)3.86kw(1.03TR)
Refrigerant evaporator temperature -15F (-26C), 2. Required Ton (W)
Condensing temperature: 95F (35C) 3. Heat exchange facor (R)   1.15
thickness 7/8"(22mm) 1-1/8" (28.5mm), 1-1/8" 1-1/3(33.8)
Crushed ice 3/16 - 1/4 thick can be produced by modificatioin of cutter		 4. Correction factor according to supply water S
Ambient temperature 40F -> 100F (5C ->38C), Data based 90F(33C) 5. Evaporative temp -25C base
60Hz electrical supply. Capacity will be less for higher temperatures, 50 Hz     CALCULATION   EXAMPLE
Electric supply and on units using expansion valves. Required   production ton :5 tons, Supply water temp 15C Assiuming
So the necessary freezing capacity is asi follows:
QKIW = T X W X R X S

QKIW = T(i3.86) X W(5TON) X R(1.15) X S(I.19)=26.I4KIW AT -25C ET
Specifications subject to change without notice. 

 
 

WELLCOM TRS - manufacturer

flake type for industrial and commercial application

flake type ice plant is designed for consumer who need continuous flake shape ice production.This flake shaped is used for the job site which must be chilled as soon as it should be cooled immediately down to 0°C and with no subsequent break in the cold chain,In flake type machine ,evaporator,reamer gear with cutter and ice breaker rotate constantly so subsequence production is possible.flake type ice plant is useful for marine fishing vessel,WELLCOM produce commercial amd industrial production capacity with storage bin.

For the commercial capacity the range from 1 metric ton to 5 metric ton prodcution ice plant. for industrial capacity, from 7 tons to 100 tons production capable ice plant. not only fresh water but sea water system is available for marine and land application.This flake system can be conbined with screw or pneumatic conveying system.Flake ice machine is also very useful as the concrete cooling industry.Flake type of flake ice machine can be mixed well with cement in cement mixer owing to it's spacious cooling surface. Quick cooling time can be accmplished..

 TRS MODEL  WCFIM - WOC /  SC

flake type


 


 
             WCFIM-WOC(Without Condensing Unit, generator only)
FLAKE type  EVAPORATOR   DRUM   ONLY  (Refer to compressor selection below)
Model-Tons Compressor Reamer  Motor Pump Motor Dimensions
KW KW     KW/GPMm H   L  W (mm)
WOCFIM1000-1 5.5 0.2 0.04
WOCFIM2000-2 11 0.4 0.04
WOCFIM3000-3 17 0.4 0.04
WOCFIM5000-5 28 0.75 0.04
WOCFIM7000-7 40 0.75 0.04
WOCFIM10000-10 55 0.75 0.04
WOCFIM15000-15 80 1.5 0.07
WOCFIM20000-20 115 1.5 0.15
WOCFIM25000-25 150 1.5 0.25
WOCFIM38000-38 221 2 0.30

Model WOCFIM-Drum only

Model FIM-SC-Water cooled

Model FIM-SC- Air cooled
  FLAKE TYPE   WCFIM-SC(SELF CONTAINED WITH CONDENSING UNIT)
Model-Tons Compressor Reamer  Motor Pump Motor Dimensions
HP HP  KW/GPM H    L   W (mm)
WCFIM1000-1 10 1/4 0.04 2308
WCFIM2000-2 15 1/2 0.04 2389
WCFIM3000-3 25 1/2 0.04 2470
WCFIM5000-5 40 1 0.04 2551
WCFIM7000-7 60 1 0.04 263230
WCFIM10000-10 75 1 0.04 2713
WCFIM15000-15 125 2 0.07 2794
WCFIM20000-20 150 2 0.15 2875
WCFIM25000-25 200 2 0.25 2970
WCFIM38000-38 300 3 0.30 3064

 

 
standard conditions*
Capacity is rated under the following standard conditions 
Necessary Freezing capacity calculation 
for compressor selection of WOCFIM Model buyer 
 

 Flake machine
Water temperature 60F (16C), incoming 1. One refrigeration ton (T)3.86kw(1.03TR)
Refrigerant evaporator temperature -15F (-26C), 2. Required Ton (W)
Condensing temperature: 95F (35C) 3. Heat exchange facor (R)   1.15
thickness 1/16" (1.5mm),  4. Correction factor according to supply water S 
Ambient temperature 40F -> 100F (5C ->38C),  5. Evaporative temp -25C base
60Hz electrical supply. Capacity will be less for higher temperatures, 50 Hz     CALCULATION   EXAMPLE
Electric supply and on units using expansion valves. Required production ton :5 tons, Supply water temp 15C Assiuming
So the necessary freezing capacity is asi follows:
QKIW = T X W X R X S

QKIW = T(i3.86) X W(5TON) X R(1.15) X S(I.19)=26.I4KIW AT -25C ET
Specifications   subject to change without notice. 

 
 

 

  Nugget  type

crushed ice machine


 TRS MODEL  WCNIM -   SC

WELLCOM TRS Ice machine manufacturer
 
 Ice machine nugget
 
 
 
 
 
 

 

 
             WCNIM-WOC(Without Condensing Unit, ice machine nugget -generator only)
Nugget(crushed) ice maker   EVAPORATOR   CYLINDER   ONLY  (Refer to compressor selection below)
Model-Tons Compressor breaker - (Cutter  Motor) Pump Motor Dimensions
Horse power HP  HP H    L   W (mm)
WOCNIM300 1.5 7.5 0.75 1/4
WOCNIM 2 10 1.5 1/4
WOCNIM 3 15 1.5 1/4
WOCNIM 5 25 1.5 1/4
WOCNIM 6 30 1.5 1/4
WOCNIM 8 40 1.5 2/5
WOCNIM 12 60 2.2 3/4
WOCNIM 15 80 2.2 (2)0.75
WOCNIM 20 100 2.2 (2)0.75
WOCNIM 30 100 3 (2)0.75
WOCNIM 40 125 3 1
WOCNIM 50 125 2(2) 1-1/2
WOCNIM 70 200 3(2) 2
WOCNIM 85 250 3(2) 2(2)
Model WOCNIM-Drum only
Model NIM-SC-Water cooled

Model NIM-SC- water cooled
 NUGGET(crushed)  ICE  MAKER WCNIM-ice maching nugget -SC(SELF CONTAINED WITH CONDENSING UNIT)
Model-Tons Compressor breaker - Cutter  Motor) Pump Motor Dimensions
Horse power HP  HP H    L   W (mm)
WCNIM 1.5 7.5 0.75 1/4 2000   1150   2150
WCNIM 2 10 1.5 1/4 2100   1150   2150
WCNIM 3 15 1.5 1/4 2100   1250   2150
WCNIM 5 25 1.5 1/4 2300   1950   2150
WCNIM 6 30 1.5 1/4 2300   2150   2150
WCNIM 8 40 1.5 2/5 2300   2150   2150
WCNIM 12 60 2.2 3/4 2400   2850   2250
WCNIM 15 80 2.2 (2)0.75 2300   3250   2250
WCNIM 20 100 2.2 (2)0.75 2500   3650   2250
WCNIM 30 100 3 (2)0.75 2600  6950   2350
WCNIM 40 125 3 1
2700   8550   2650
WCNIM 50 125 2(2) 1-1/2
3100   8550   2650
WCNIM 70 200 3(2) 2
3100   9550   2650
WCNIM 85 250 3(2) 2(2)
3300   8550   2650
         

 


 
standard conditions*
Capacity is rated under the following standard conditions 
Necessary Freezing capacity calculation 
for compressor selection of WOCFIM Model buyer 
 

 ice machine nugget
Water temperature 60F (16C), incoming 1. One refrigeration ton (T)3.86kw(1.03TR)
Refrigerant evaporator temperature -15F (-25C), 2. Required Ton (W)
Condensing temperature: 95F (35C) 3. Heat exchange facor (R)   2.0
thickness 1/16" (1.5mm),  4. Correction factor according to supply water S 
Ambient temperature 40F -> 100F (5C ->38C),  5. Evaporative temp -25C base
60Hz electrical supply. Capacity will be less for higher temperatures, 50 Hz     CALCULATION   EXAMPLE
Electric supply and on units using expansion valves. Required production ton :5 tons, Supply water temp 15C Assiuming
So the necessary freezing capacity is asi follows:
QKIW = T X W X R X S

QKIW = T(i3.86) X W(5TON) X R(2.0) X S(I.19)=26KW AT -25C ET
Specifications of ice machine nugget subject to change without notice.   

 
 

 

 

PLATE EVAPORATOR  TYPE

(CRUSHED ICE MACHINE)

TRS MODEL  WCCPIM-WOC / SC

 

WELLCOM TRS - manufacturer

CRUSHED WITH PLATE EVAPORATOR

 
             WOC-PIM-WOC(Without Condensing Unit, PLATE TYPE - Evaporator only) CRUSHED ICE MACHINE
PLATE TYPE- EVAPORATOR W/CUTTER ONLY
Model-Tons Compressor breaker - Cutter Motor) Pump Motor Dimensions
Horse power HP  HP   L    W   H(mm)
WOCPIM 1T 5 1 1/2 1930   609  1820 
WOCPIM 2T 10 1 1/2 1900    2184   2006
WOCPIM 3T 20 1-1/2 1/2 3048   2235   2489
WOCPIM 5T 30 1-1/2 1/2 3657  2235   2387
WOCPIM 7 35 1-1/2 3/4 4851   2235   2590
WOCPIM 10T 40 3 3/4 5410   2184   2590
WOCPIM14T 2(35) 3 (2) 3/4 7924  2438   2997
WOCPIM 15T 60 3 (2) 3/4 7924   2438   2997
WOCPIM 20T 75 3 (2) 3/4 5029   2387   2794
WOCPIM 30T (2)60 2 x 3 (2) 3/4 5029   2387   2794
WOCPIM 40T (2)75 2 x 3 (4) 3/4 6502   2387  2794
WOCPIM 60T (2)100 3 x 3 (6) 3/4 12446   2387   3302

WOC PIM-Evaporator only

WOC PIM-Evaporator only
  WCPIM-SC(SELF CONTAINED WITH CONDENSING UNIT)  PLATE TYPE -  CRUSHED ICE MACHINE
Model-Tons  Compressor breaker - Cutter Motor Pump Motor/Water supply Dimensions
Horse power HP  KW/GPM H     L    W (mm)
WCPIM 1T 5 1 1/2 1930   609   1820 
WCPIM 2T 10 1 1/2 1900    2184   2006
WCPIM 3T 20 1-1/2 1/2 3048   2235   2489
WCPIM 5T 30 1-1/2 1/2 3657   2235   2387
WCPIM 7 35 1-1/2 3/4 4851   2235   2590
WCPIM 10 40 3 3/4 5410   2184   2590
WCPIM 14 (2)35 3 (2)3/4 7924   2438  2997
WCPIM 15 60 3 (2) 3/4 7924   2438   2997
WCPIM 20T 75 3 (2) 3/4 5029   2387   2794
WCPIM 30T (2)60 2 x 3 (2) 3/4 5029  2387   2794
WCPIM 40T (2)75 2 x 3 (4) 3/4 6502   2387  2794
WCPIM 60T (2)100
3 x 3
(6) 3/4
12446   2387   3302

 
standard conditions*
Capacity is rated under the following standard conditions 
Necessary Freezing capacity calculation 
for compressor selection of WOCFIM Model buyer 
   
Water temperature 60F (18C), incoming 1. One refrigeration ton (T)3.86kw(1.03TR)
Refrigerant evaporator temperature 5F (-15C), 2. Required Ton (W)
Condensing temperature: 95F (35C) 3. Heat exchange facor (R)   2.0
thickness 7/8"(22mm) 1-1/8" (28.5mm), 1-1/8" 1-1/3(33.8)
Crushed ice 3/16 - 1/4 thick can be produced by modificatioin of cutter		 4. Correction factor according to supply water S 
Ambient temperature 40F -> 100F (5C ->38C), Data based 90F(33C) 5. Evaporative temp -15C base
60Hz electrical supply. Capacity will be less for higher temperatures, 50 Hz     CALCULATION   EXAMPLE
Electric supply and on units using expansion valves. Required   production ton :5 tons, Supply water temp 15C Assiuming
So the necessary freezing capacity is asi follows:
QKIW = T X W X R X S

QKIW = T(i3.86) X W(5TON) X R(2.0) X S(I.19)=45KW AT -15C ET
Specifications subject to change without notice.  other product: plate freezer,compressor,ice machine
VILTER  KOREA  CORPORATION
Fax +82 51 254 6968  TEL +82 51 248 9907  LOCATION  602092 6-4 288 PUSAN S,KOREA
 

PLEASE SELECT ONE OF MODEL CHECK BOX NEXT TO MODEL NO, FILLING OUT BELOW FORM AND CLICK SUBMIT INQUIRY.WE'LL REPLY IN 24HRS.THANKS

 

COMPANY NAME CONTACT PERSON E-MAIL / FAX
Application Comment